Scanner SNMP Auxiliary Modules
a11y.text Scanner SNMP Auxiliary Modulessnmp_enum
a11y.text snmp_enumThe snmp_enum module performs detailed enumeration of a host or range of hosts via SNMP similar to the standalone tools snmpenum and snmpcheck.
msf > use auxiliary/scanner/snmp/snmp_enum
msf auxiliary(snmp_enum) > show options
Module options:
Name Current Setting Required Description
---- --------------- -------- -----------
COMMUNITY public yes SNMP Community String
RETRIES 1 yes SNMP Retries
RHOSTS yes The target address range or CIDR identifier
RPORT 161 yes The target port
THREADS 1 yes The number of concurrent threads
TIMEOUT 1 yes SNMP Timeout
VERSION 1 yes SNMP VersionAlthough you can pass a range of hosts to this module, the output will become quite cluttered and confusing so it is best to simply do one host at a time.
msf auxiliary(snmp_enum) > set RHOSTS 192.168.1.2
RHOSTS => 192.168.1.2
msf auxiliary(snmp_enum) > run
[*] System information
Hostname : Netgear-GSM7224
Description : GSM7224 L2 Managed Gigabit Switch
Contact : dookie
Location : Basement
Uptime snmp : 56 days, 00:36:28.00
Uptime system : -
System date : -
[*] Network information
IP forwarding enabled : no
Default TTL : 64
TCP segments received : 20782
TCP segments sent : 9973
TCP segments retrans. : 9973
Input datagrams : 4052407
Delivered datagrams : 1155615
Output datagrams : 18261
[*] Network interfaces
Interface [ up ] Unit: 1 Slot: 0 Port: 1 Gigabit - Level
Id : 1
Mac address : 00:0f:b5:fc:bd:24
Type : ethernet-csmacd
Speed : 1000 Mbps
Mtu : 1500
In octets : 3716564861
Out octets : 675201778
...snip...
[*] Routing information
Destination Next hop Mask Metric
0.0.0.0 5.1.168.192 0.0.0.0 1
1.0.0.127 1.0.0.127 255.255.255.255 0
[*] TCP connections and listening ports
Local address Local port Remote address Remote port State
0.0.0.0 23 0.0.0.0 0 listen
0.0.0.0 80 0.0.0.0 0 listen
0.0.0.0 4242 0.0.0.0 0 listen
1.0.0.127 2222 0.0.0.0 0 listen
[*] Listening UDP ports
Local address Local port
0.0.0.0 0
0.0.0.0 161
0.0.0.0 514
[*] Scanned 1 of 1 hosts (100% complete)
[*] Auxiliary module execution completed
msf auxiliary(snmp_enum) >snmp_enumshares
a11y.text snmp_enumsharesThe snmp_enumshares module is a simple scanner that will query a range of hosts via SNMP to determine any available shares.
msf > use auxiliary/scanner/snmp/snmp_enumshares
msf auxiliary(snmp_enumshares) > show options
Module options:
Name Current Setting Required Description
---- --------------- -------- -----------
COMMUNITY public yes SNMP Community String
RETRIES 1 yes SNMP Retries
RHOSTS yes The target address range or CIDR identifier
RPORT 161 yes The target port
THREADS 1 yes The number of concurrent threads
TIMEOUT 1 yes SNMP Timeout
VERSION 1 yes SNMP Version >1/2c>We configure the module by setting our RHOSTS range and THREADS value and let it run.
msf auxiliary(snmp_enumshares) > set RHOSTS 192.168.1.200-210
RHOSTS => 192.168.1.200-210
msf auxiliary(snmp_enumshares) > set THREADS 11
THREADS => 11
msf auxiliary(snmp_enumshares) > run
[+] 192.168.1.201
shared_docs - (C:\Documents and Settings\Administrator\Desktop\shared_docs)
[*] Scanned 02 of 11 hosts (018% complete)
[*] Scanned 03 of 11 hosts (027% complete)
[*] Scanned 05 of 11 hosts (045% complete)
[*] Scanned 07 of 11 hosts (063% complete)
[*] Scanned 09 of 11 hosts (081% complete)
[*] Scanned 11 of 11 hosts (100% complete)
[*] Auxiliary module execution completed
msf auxiliary(snmp_enumshares) >snmp_enumusers
a11y.text snmp_enumusersThe snmp_enumusers module queries a range of hosts via SNMP and gathers a list of usernames on the remote system.
msf > use auxiliary/scanner/snmp/snmp_enumusers
msf auxiliary(snmp_enumusers) > show options
Module options:
Name Current Setting Required Description
---- --------------- -------- -----------
COMMUNITY public yes SNMP Community String
RETRIES 1 yes SNMP Retries
RHOSTS yes The target address range or CIDR identifier
RPORT 161 yes The target port
THREADS 1 yes The number of concurrent threads
TIMEOUT 1 yes SNMP Timeout
VERSION 1 yes SNMP Version >1/2c>As with most auxiliary modules, we set our RHOSTS and THREADS value and launch it.
msf auxiliary(snmp_enumusers) > set RHOSTS 192.168.1.200-211
RHOSTS => 192.168.1.200-211
msf auxiliary(snmp_enumusers) > set THREADS 11
THREADS => 11
msf auxiliary(snmp_enumusers) > run
[+] 192.168.1.201 Found Users: ASPNET, Administrator, Guest, HelpAssistant, SUPPORT_388945a0, victim
[*] Scanned 02 of 12 hosts (016% complete)
[*] Scanned 05 of 12 hosts (041% complete)
[*] Scanned 06 of 12 hosts (050% complete)
[*] Scanned 07 of 12 hosts (058% complete)
[*] Scanned 08 of 12 hosts (066% complete)
[*] Scanned 09 of 12 hosts (075% complete)
[*] Scanned 11 of 12 hosts (091% complete)
[*] Scanned 12 of 12 hosts (100% complete)
[*] Auxiliary module execution completed
msf auxiliary(snmp_enumusers) >snmp_login
a11y.text snmp_loginThe snmp_login scanner is a module that scans a range of IP addresses to determine the community string for SNMP-enabled devices.
msf > use auxiliary/scanner/snmp/snmp_login
msf auxiliary(snmp_login) > show options
Module options (auxiliary/scanner/snmp/snmp_login):
Name Current Setting Required Description
---- --------------- -------- -----------
BLANK_PASSWORDS false no Try blank passwords for all users
BRUTEFORCE_SPEED 5 yes How fast to bruteforce, from 0 to 5
DB_ALL_CREDS false no Try each user/password couple stored in the current database
DB_ALL_PASS false no Add all passwords in the current database to the list
DB_ALL_USERS false no Add all users in the current database to the list
PASSWORD no The password to test
PASS_FILE /usr/share/metasploit-framework/data/wordlists/snmp_default_pass.txt no File containing communities, one per line
RHOSTS yes The target address range or CIDR identifier
RPORT 161 yes The target port
STOP_ON_SUCCESS false yes Stop guessing when a credential works for a host
THREADS 1 yes The number of concurrent threads
USER_AS_PASS false no Try the username as the password for all users
VERBOSE true yes Whether to print output for all attempts
VERSION 1 yes The SNMP version to scan (Accepted: 1, 2c, all)We set our RHOSTS and THREADS values while using the default wordlist and let the scanner run.
msf auxiliary(snmp_login) > set RHOSTS 192.168.1.0/24
RHOSTS => 192.168.1.0/24
msf auxiliary(snmp_login) > set THREADS 254
THREADS => 254
msf auxiliary(snmp_login) > run
[+] SNMP: 192.168.1.2 community string: 'public' info: 'GSM7224 L2 Managed Gigabit Switch'
[+] SNMP: 192.168.1.199 community string: 'public' info: 'HP ETHERNET MULTI-ENVIRONMENT'
[+] SNMP: 192.168.1.2 community string: 'private' info: 'GSM7224 L2 Managed Gigabit Switch'
[+] SNMP: 192.168.1.199 community string: 'private' info: 'HP ETHERNET MULTI-ENVIRONMENT'
[*] Validating scan results from 2 hosts...
[*] Host 192.168.1.199 provides READ-WRITE access with community 'internal'
[*] Host 192.168.1.199 provides READ-WRITE access with community 'private'
[*] Host 192.168.1.199 provides READ-WRITE access with community 'public'
[*] Host 192.168.1.2 provides READ-WRITE access with community 'private'
[*] Host 192.168.1.2 provides READ-ONLY access with community 'public'
[*] Scanned 256 of 256 hosts (100% complete)
[*] Auxiliary module execution completed
msf auxiliary(snmp_login) >Our quick SNMP sweep found both the default public and private community strings of two devices on our network. This module can also be a useful tool for network administrators to identify attached devices that are insecurely configured.